OBD II Power Cable
$22.99
VUEROID OBD-II Power Cable for Dash Cam, 24/7 Parking Mode, Low Voltage Protection
OBD Ⅱ Power Cable For Dash Cam
Activate dash cam instantly with our plug-and-play installation
Compatible with All VUEROID modelsS1 4K Infinite
※Works with most vehicles manufactured after 2000
※For vehicles equipped with an OBD2 standard port only
(Not compatible with Tesla)
Support Parking Mode
Extreme Low Power Mode
Impact / Motion / Timelapse Mode
Support Parking Mode
The dashcam power automatically shuts off when the voltage drops below the set level or after a certain period of time.
1. Locate the OBD Port
※ Note: The location of the OBDII port may vary depending on the vehicle model.
For the exact location, refer to the vehicle’s manual or consult the vehicle manufacturer.
2. Connect the Dash Cam
1Plug the OBD cable
into the port
2Hide the wire
behind body panels
3Connect with
the dash cam
What’s in the Box
1 OBD Cable, 1 Trim tool, 6 Cable clips, 1 Manual
FAQ
Q1. Which vehicles can use the OBD power cable?
The OBD power cable can be used with most vehicles equipped with an OBD-II port. However, depending on the vehicle manufacturer, model, year, and OBD port power design, some vehicles may not operate normally or may have limited compatibility. In some vehicles, the OBD port may continue supplying power even after the ignition is turned off, or ACC status may not be detected properly. We recommend checking your vehicle’s OBD port characteristics and compatibility before purchase.
Q2. Does parking mode switch normally when using the OBD power cable?
In most vehicles, yes. The OBD power cable is designed to detect ACC ON/OFF status, allowing normal switching between driving mode and parking mode in general. However, depending on the vehicle’s power supply behavior, some vehicles may show different parking mode behavior or limited ACC detection. After installation, please make sure that switching between driving mode and parking mode is working properly.
Q3. Does using the OBD port affect the vehicle?
Under normal use, it does not directly affect the vehicle. The OBD power cable receives power through the vehicle’s OBD port, allowing easier installation without direct fuse box wiring. However, depending on the vehicle manufacturer and specific model, OBD port power retention behavior may differ, and some vehicles may behave differently than expected. After installation, please check that parking mode switching and battery protection functions are operating normally.
Q4. Is the OBD power cable better than the hardwire cable?
Both methods support parking mode recording, but they differ in installation method and convenience. The OBD power cable is easier to install because it does not require fuse box wiring and can be removed more easily. The hardwire cable connects directly to the fuse box and is the more common installation method. Depending on the vehicle, it may provide more stable power supply. We recommend choosing the method that best fits your vehicle and installation preference.
Reviews
Add a review
OBD II Power Cable
Your review
* Review is required
Name
* Name is required
Email
* Email is required
Add photos or video to your review
* Please tick the checkbox to proceed
| 5 star | 0% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
0 of 0 reviews
Sorry, no reviews match your current selections