8 Pack 4 Types Fuse Tap Kit, Add a Circuit, ATO, Micro2, Mini, Low Profile Fuse Tap for Dash Cam, Automotive Fuse Tap, Car Accessories
Fuse Tap Kit For Dash Cam
safe, reliable power connection for your dash cam
Fuse Tap Types
Product Details
To use the fuse tap, cut the hardwire cable only up to the point where the insulation is still covering it.
Insert the red and yellow wires of the VUEROID hardwire cable into the I-type connector, matching each color with its fuse tap. Then crimp firmly using a crimping plier.
With the vehicle completely powered off, locate the vehicle’s fuse box.
※ Note: The location of the fuse box may vary depending on the vehicle model. For the exact location, refer to the vehicle’s anual or consult the vehicle manufacturer.
Identify the constant power (BAT) and ACC terminals in the fuse box, then carefully remove the fuses from each terminal.
※ If a fuse in the vehicle’s fuse box has already been used to install a dashcam with the VUEROID Hardwire cable, you may reuse that fuse.
Insert the removed fuses into the fuse holders, distinguishing ACC (red wire) and BAT (yellow wire).
Insert the ACC fuse tap (red) into the ACC terminal, and the BAT fuse tap (yellow) into the BAT terminal.
Use a tester to confirm the power direction. The INPUT side of the fuse holder must connect to the vehicle’s power supply.
※ Do not reverse the INPUT/OUTPUT direction.
After installation, switch the dashcam power to ON, start the vehicle, and confirm that the dashcam turns on and records normally.
What’s in the box
Fuse Tap 8ea, Connector 4ea, User Manual
Specification
Features
- safe, reliable power connection for your dash cam
Specification
- Dual-Slot Circuit Protection
- Stable Power Delivery
- Secure Fit That Resists Vibration and Movement While Driving
- Includes ATO, Mini, MICRO2, and Low Profile Mini fuses to support various vehicle fuse types and wiring needs
- Package Includes: 8 fuse taps, 4 connectors, 1 user manual
PACKAGE
Compatible with
- All VUEROID Models













