D10-F2_firmware_v1.00
Instructions
- Download the latest firmware and unzip file.
- Plug your MicroSD card into your computer and save any dash cam footage you wish to keep
- Format your MicroSD card in your computer
- PLEASE NOTE: This step will erase all the data on your memory card.
- Open the unzipped Firmware Folder, and copy all contents onto the MicroSD card
- Insert the MicroSD card into your dash cam and power it on.
- Wait for the camera to announce, “Upgrade is now complete, continuous recording will now start.
- Your dash cam LED lights should blink while the firmware upgrade is taking place
Do not power off your dash cam until it begins continuous recording, as it may cause permanent damage to the dash cam
Q. How do I connect the power to Vueroid Dashcam?
You have two options available;
Using 12v cigar cable and connect from external cigar socket to DC-IN power port of your Vueroid dashcam.
* With cigar cable you won’t be able to use the parking mode.
Using a hardwiring cable and connect from accessories power from the fuse panel of your vehicle.
Q. Will parking mode drain my car battery?
Dashcams with a battery protection feature will shut off before your car battery reaches a critical level. Using an external dashcam battery can prevent battery drain.
VUEROID Dashcam : D10-F2W Day-time driving
VUEROID Dashcam : D10-F2W Night-time driving